Atlas Copco FCS 220-240 —
Mobile Fast Charging Station
A towable lithium iron phosphate battery-powered charging station for fast recharging of electric construction and mining equipment on-site. Up to 220 kW DC output in standalone mode, 232 kWh energy storage, charging setup in around 10 seconds.
About the Solution
At construction, quarry and mining sites, electric equipment often operates where permanent connection to charging infrastructure is unavailable or not economically viable. The FCS 220-240 brings the charger to the machine — not the machine to a charging port.
The FCS 220-240 is a towable charging station based on a lithium iron phosphate (LiFePo4) battery, capable of operating in standalone mode (from the internal storage) or simultaneously connected to an external grid or diesel generator in Charge-to-Discharge mode. The system is controlled via the ECO Controller™ — Atlas Copco human-machine interface for temporary power applications.
Key Benefits
Confirmed characteristics of the Atlas Copco FCS 220-240
Technical Specifications
Data from official Atlas Copco documentation (FCS 220-240). Specifications are given for standard conditions: 25 °C, 100 kPa, 30% relative humidity.
| Parameter | Value |
|---|---|
| General Data | |
| Nominal DC output power (standalone) | 220 kW (240 kW assisted) |
| Nominal AC output power | 50 kW |
| Nominal voltage / frequency (AC) | 400 V / 50 Hz |
| DC output voltage range | 200–950 VDC |
| DC output current | 250 A |
| Input power DC / AC | up to 192 / 90 kW |
| Protection degree | IP 54 |
| Operating temperature | −20 to +50 °C |
| Dimensions (L × W × H) | 4,670 × 2,200 × 2,520 mm (with trailer) |
| Weight | 3,500 kg |
| Sound level (LvA / LpA at 7 m) | <70 dB(A) |
| Energy Storage | |
| Nominal energy storage capacity | 233 kWh |
| Net energy storage capacity | 209.7 kWh |
| Battery system voltage | 768 VDC |
| Rated discharge current | 302 A |
| Recharge time DC / AC | 0.9 / 2.3 h |
| Depth of discharge (DoD) | 90% |
| Total energy through output up to | 869.7 MWh |
| Expected cycle life | 4,000 cycles (@DoD 80%, EOL 70%, 25 °C) |
| Battery type | LiFePo4 (5 batteries) |
| Battery rated capacity (@25 °C) | 304 Ah |
| Connections | |
| Input connection (AC) | 1× 125A CEE / 1× 32A CEE |
| Input connection (DC) | 1× CCS2 |
| Output connection (AC) | 1× 63A CEE; 1× 32A CEE; 1× 16A 1ph |
| Output connection (DC) | 2× CCS2 (9 m cable) |
| Diesel generator control | yes |
| ECO Controller™ | |
| Communication ports | Ethernet (WAN/LAN), OCCP |
| Min/max operating temperature | −20 °C to +55 °C |
| Screen size | 10 inch |
| Fleetlink / 2-way communication | standard |
| Safety & Other | |
| Smoke, fire, H₂ detection | option |
| Visual and audible alarm | yes |
| FSS + water inlet | option |
| Lockable doors (daily / service) | yes |
| Emergency stop | yes |
| Water input connection | standard |
| Minimum altitude without derating | 2,000 m |
| Min temperature without derating | 0 °C |
Specifications are subject to change without prior notice. Current data available at the official Atlas Copco website.
How It Works
The FCS 220-240 creates a temporary charging infrastructure directly on-site. It operates in standalone mode (from the built-in storage) or with simultaneous connection to a grid or generator — in Charge-to-Discharge mode.
In Charge-to-Discharge mode, the FCS 220-240 combines its internal storage with external AC or DC sources — the combined output exceeds the standalone rating and reaches 240 kW DC. The station automatically distributes available power between connected machines.
Applications
The FCS 220-240 is designed for sites where electric equipment operates with limited or no fixed charging infrastructure
FCS 220-240 vs. Fixed Charging Infrastructure
A mobile solution and a fixed installation serve different purposes. The right choice depends on the specific project.
| Parameter | FCS 220-240 (mobile) | Fixed infrastructure |
|---|---|---|
| Permanent installation required | ✓ Not required | Required |
| Suitable for temporary sites | ✓ Yes | Limited |
| Move between sites | ✓ Towable | Not applicable |
| No construction works required | ✓ Yes | Installation needed |
| Off-grid charging capability | ✓ Standalone mode | Requires grid connection |
| Long-term permanent sites | Limited | ✓ Optimal |
Electrification of Construction and Mining Equipment
Electric excavators, loaders and dump trucks are already operating on real sites. One of the practical questions when transitioning to electric equipment is how to organise charging during the working shift, especially at remote or temporary sites.
The FCS 220-240 provides a temporary charging infrastructure directly on-site. The station comes to the machine — not the machine to the charging port: charging happens during breaks without interrupting the work cycle.
Atlas Copco offers a complete portfolio of charging solutions for electric equipment — from mobile portable charging stations to fixed FCP 160–480 kW charging complexes.
Why Wayland Armenia
Official Atlas Copco dealer in Armenia
Request a Quote for Atlas Copco FCS 220-240
Fill in the form — our manager will contact you within 1 business day. We are ready to discuss the application for your specific site, provide technical documentation and advise on supply terms.
Request Information
Atlas Copco FCS 220-240 — Mobile Fast Charging Station
Request Sent!
Our manager will contact you within 1 business day.
+374 10 530 669